RJG Blog | How to Prevent Moisture-Related Defects in Injection Moulding

Despite its efficiency and versatility, injection moulding is susceptible to moisture-related defects that can compromise the quality and integrity of the final product. Moisture, if not properly managed, can lead to issues such as surface blemishes, dimensional instability, and reduced mechanical properties. In this blog post, RJG delves into the importance of preventing moisture-related defects in injection moulding and explore strategies to mitigate them effectively.

Understanding the Impact of Moisture

Moisture in plastic resins can cause a range of problems during the injection moulding process. When heated, moisture trapped within the resin can vaporise, forming bubbles or voids in the moulded part, commonly known as “splay” or “silver streaks.” These defects not only affect the aesthetics of the product but also weaken its structural integrity. Furthermore, moisture can alter the viscosity of the molten resin, leading to flow inconsistencies, incomplete filling of the mould, and dimensional inaccuracies in the final part.

Preventive Measures

To ensure high-quality injection-moulded parts, it’s crucial to implement effective moisture management techniques throughout the manufacturing process. Here are some preventive measures to consider:

1. Proper Storage of Resin: Moisture absorption begins the moment plastic resin is exposed to humid air. Therefore, storing resin in a dry environment with controlled humidity levels is essential. Utilise sealed containers or moisture-proof packaging to protect the resin from atmospheric moisture during storage.
2. Pre-Drying of Resin: Before processing, especially for hygroscopic resins like nylon and PET, pre-drying the resin is imperative to remove any absorbed moisture. This can be achieved through thermal drying processes such as hot air ovens or desiccant dryers. Follow resin supplier recommendations for optimal drying conditions and duration to prevent over-drying, which can degrade resin properties.
3. Moisture Measurement: Implement regular moisture content testing of resin pellets using moisture analysers or Karl Fischer titration methods. Monitoring moisture levels helps ensure that resin is adequately dried before processing, minimizing the risk of moisture-related defects.
4. Closed-Loop Dehumidification Systems: Integrate closed-loop dehumidification systems into the injection moulding equipment to maintain low humidity levels in the processing environment. These systems circulate dry air through the hopper and barrel, preventing moisture uptake by the resin during the moulding process.
5. Proper Mouding Conditions: Optimise moulding parameters such as melt temperature, injection speed, and mould temperature to minimise the effects of moisture on the final part. Higher melt temperatures can help evaporate residual moisture more effectively, while adequate mould cooling reduces the likelihood of surface defects. You can do this through the combination of temperature sensors, cavity pressure sensors, and a process control system.
6. Post-Moulding Treatment: Implement post-moulding treatments such as annealing or conditioning to relieve residual stresses and minimise the effects of moisture absorption on part performance over time.

Conclusion

Moisture-related defects pose significant challenges in injection moulding, impacting product quality, consistency, and performance. By implementing proactive measures such as proper resin storage, pre-drying, moisture monitoring, and optimised processing conditions, you can effectively mitigate the risks associated with moisture and ensure the production of high-quality injection-moulded parts. Ultimately, mastering moisture management is essential for achieving consistent results and meeting stringent quality standards in injection moulding operations.

Read more from RJG here.

RJG
+44 (0)1733 232211
Website
Email